Pop & Bang tuningfiles

We have various pop & bang tuningfiles available for a wide range of cars. See the list below and click the brand you're searching for.

Pop & Bang Alfa Romeo
Pop & Bang Audi (1)
Pop & Bang Audi (2)
Pop & Bang BMW (1)
Pop & Bang BMW (2)
Pop & Bang BMW (3)
Pop & Bang Citroën, Ferrari, Fiat
Pop & Bang Ford (1)
Pop & Bang Ford (2)
Pop & Bang Hyundai, Infinity, Jaguar, Kia
Pop & Bang Lamborghini, Land Rover, Maserati
Pop & Bang Mercedes-Benz (1)
Pop & Bang Mercedes-Benz (2)
Pop & Bang Mercedes-Benz (3)
Pop & Bang Mercedes-Benz (4)
Pop & Bang Mercedes-Benz (5)
Pop & Bang Mini (1)
Pop & Bang Mini (2)
Pop & Bang Opel, Peugeot
Pop & Bang Porsche (1)
Pop & Bang Porsche (2)
Pop & Bang Porsche (3)
Pop & Bang Renault, Seat, Skoda
Pop & Bang Volkswagen (1)
Pop & Bang Volkswagen (2)
Your brand not listed? Contact us for possibilities.


 

 

 

 

 

 

 

 

 

 

 

Pops, Bangs and crackles Explained

 

Examples from our customers

 
You have probably heard the pop & bang even on some cars that haven’t been modded. They are of far lower intensity and usually found only on sports cars, but the possibility of aftermarket mods which can bring the massive sound to almost any car has made it incredibly popular in the recent years. And, yes, you can now have it on diesels as well.
 
 

What is a pop and bang remap? Schubabschaltung deaktivierung

The pops, bangs and crackle mod is also called exhaust crackle deceleration, exhaust popping, burble, car backfire, crackle map, anti-lag system (ALS), schubabschaltung deaktivieren, schubabschaltung knallen, schubabschaltung blubbern, schubblubbern or deceleration map and it results in those beastly bangs and healthy gurgles from the exhaust when the accelerator pedal is released.
 
It is as simple as that and absolutely beautiful.
 
However, the benefits of the soundtrack are not the only thing you should take into account before you decide if you should include pop & bangs into your arsenal of automotive fun. This software modification comes with direct consequences for your engine and exhaust.
 
 
 

How to make exhaust pop and bang

There are 2 modifications that result in pop bangs. 
 
1. after the throttle pedal is released, the fuel delivery is not cut off immediately. It is delayed in order to provide fuel delivery during deceleration as well, schubabschaltung deaktivieren. 
 
2. The next modification is a change in ignition timing which we retard. The ignition causing a flame front happens later than usual – even when exhaust valve is opening – and this causes the flame front to to take place inside the cylinder, but also in the space that connects the valves and the exhaust, thus giving the desired sound.
 
The main advantage is that during deceleration, the delayed combustion flow will also pass the turbocharger causing the turbo to keep its revs high instead of losing revs due to the lack of exhaust flow which would happen without the modification. Aside from the soundtrack benefit, this also means that your car will be faster. This is so because the running turbo means that you waste no time with spooling up when you press the pedal again. The reaction time is noticeably shorter and the turbo lag is virtually non-existent, so we also call this mod anti-lag.
 
Another perk that many of our customers opt for is having the same sound when the car is not moving at all. Pops and bangs are noticeably louder when the car is moving, but the sound at standing still unmistakably gives the hint of what the car is capable of when you finally get going.
 
pop and bang ecu files
 

Is an aftermarket exhaust a necessity for pop & bang?

No, you can have the sounds even with stock exhausts. However, sports exhausts will give off louder pops and bangs. This is why we have 2 stages of pop & bang modifications with two different software designs:
 
Pop & Bang Stage 1 is used for the cars with stock parts and regular exhausts. This modification results in pops and bangs of moderate loudness, but definitely enough to make you noticed.
 
Pop & Bang Stage 2 requires sports or aftermarket exhaust and in combination with these, it provides the loudest pops and bangs around. The aftermarket exhaust lets us go wild with the software adjustment and not hold back due to the limitations of the stock catalyst. If the Stage 1 makes people notice you, Stage 2 makes them scared!
 
Mind you, catalytic converter has to be removed for pop & bang Stage 2 modification since it cannot withstand the temperatures and stress caused by the modification.
 
 
 

Is turbocharger a necessity for pop & bang?

No, it’s not. You can have pop & bang even on naturally aspirated engines. Of course, since without turbo we can’t deal with the turbo lag, the cool sound will be the only benefit, albeit an amazing one.
 
 
 

The good side of pop & bang

Pop & bang sounds awesome! You can hear them when you lift off the throttle pedal during, deceleration or braking or when releasing the throttle between shifts. It definitely turns a lot of heads, but it also gives you the feeling of driving a hardcore sports car, since these kinds of sounds have usually been reserved for the top notch supercars. Well, now you can have them, too!
 
Secondly, for turbo engines, it adds another benefit of the mentioned anti-lag system, which greatly improves the reaction time of the turbocharger. After pop & bang modification, your turbocharged car will not only sound meaner, but it will also be faster and offer that amazing feel of continuous acceleration that many turbocharged cars lack.
 
 
 

The bad side of pop & bang

All of the bad sides are inherent due to the pop and bang mechanism and the most devastating ones come from modifications which are not performed properly. If your pop & bang modification is performed properly, the risks still exist, but they are definitely not that dangerous.
 
The most devastating side effects for your engine include damage to the valves, turbine and piston heads due to the explosions which happen at very high temperatures. These components outside the cylinders are not intended to ever get into touch with such high temperatures.
 
The same feature means that pop & bang Stage 2 is not the best option for cars which have stock exhausts with a catalytic converter. If you want Stage 2 Pop & Bang, you will need to remove the stock catalyst. Stage 1 Pop & Bang can be done on stock parts, including the catalyst and it will result in milder pops and bangs 
 
Many people who understand how engines work think that the late ignition automatically means that performance is hampered, since the best moment for ignition is when the piston is in the top position, or just before that. However, this is not so. Matching delayed ignition with the moments of low load means that this happens only when you lift your foot off the throttle pedal, so no performance loss occurs. In fact, even with the foot off the throttle pedal, high revs of the turbo after the modification improve the engine response and performance.
 
 
 

Is pop & bang safe?

Even though the mere fact that the explosions happen in the space that is not designed to deal with the resulting temperatures should mean that pop & bang is not safe, if the schubabschaltung modification is properly developed, it is safe.
 
In fact, many car companies such as VW, BMW, Mercedes-Benz and Lamborghini offer OEM pop & bang feature and that one is bound to be safe. In most cases, this feature is activated in sports mode.
 
Being too aggressive with pop & bang modification can result in loss of power and serious damage to the engine, valves, turbo and exhaust. However, thorough testing and measuring ensures a mod which is completely safe and sounds great.
 
This is why it is important that you choose your options wisely. We pride ourselves on our well-deserved and long-lasting reputation and we can claim safety on Stage 1 mods. However, due to their aggressive nature and varying levels of modification, we only do Stage 2 mods on your responsibility.  
 

Is it worth it?

We keep getting an increase in orders for schubabschaltung pop & bang software mods and we are working overtime in order to keep our company at the very top of the lot when it comes to both quality and the number of ECUs we provide pop & bang for.
 
This high number of orders clearly means that our customers are satisfied. And the sound is just too good!
 
 

For what ECUs we provide pop & bang modifications

We are continuously working on developing pop & bang mods for as many ECUs as we can, so by the time you read this, we will have probably added more ECUs to the list. Make sure you contact us to check if we have pop & bang for your ECU even if it is not on the list below.
 
At the moment, we offer pop & bang modification for the following ECUs on petrol/gasoline cars:
 
- Bosch ME7.X
 
- Bosch ME9.X
 
- Bosch ME(V)D17.X
 
- Siemens EMS
 
- Siemens Simos 8.X
 
- Siemens Simos 12
 
- Siemens Simos 18
 
These can be found in cars made by Audi, Volkswagen, Seat, Skoda, Lamborghini, Ferrari, Fiat, Lancia, Porsche, Mercedes Benz, Renault, Peugeot, Citroen, BMW, MINI, Ford, Volvo, etc.
 
 

As for the diesels, we offer pop & bang modification for the following ECUs:

 
- Bosch EDC15
 
- Bosch EDC16
 
- Bosch EDC17
 
- Siemens
 
- Delphi
 
- Denso…
 
These can be found in cars made by Audi, Volkswagen, Seat, Skoda, Fiat, Lancia, Porsche, Mercedes Benz, Renault, Peugeot, Citroen, BMW, MINI, Ford, Volvo, etc.
 
 
 
Moreover, we offer tuning stages 1, 2 and 3, as well as other features usually found only in supercars and even race cars such as No-Lift Shift (flat shift), Hard Rev Cut (hardcut limiter), Map Switching (multi boost maps), Launch control and more.
 
 
 
You want to sell pop and bang to your customers?
Opening Hours

Our offices are now Open

Monday :06:30 till 19:00
Tuesday :06:30 till 19:00
Wednesday :06:30 till 19:00
Thursday :06:30 till 19:00
Friday :06:30 till 17:00
Saturday :06:30 till 16:00
Sunday :Closed

Current Time in Germany