Home » News » Stage 3 Special Engine Swap Project Audi S3 With GTI Engine & Upgraded To TTE525 Turbo Producing 385HP 500NM

Stage 3 Special Engine Swap Project Audi S3 With GTI Engine & Upgraded To TTE525 Turbo Producing 385HP 500NM

Stage 3 Special Engine Swap Project Audi S3 With GTI Engine & Upgraded To TTE525 Turbo Producing 385HP 500NM

The McLaren 570S 3.8t Coupé is the first Sport Series car presented by a British company. Presented officially in April 2015 at a car dealership in New York joined the range as the smallest of the models. The assumption was to be a car competing with the Porsche 911 Turbo and Turbo S, not only because of the performance, but also the price range. The source of the McLaren 570S 3.8t drive is a 3.8-liter V8 charged with two turbochargers in parallel. This engine is weaker than in larger and higher positioned 650S and P1. However, power is still quite big for this mass. The McLaren V eight is developing 570 hp in this model. Hence the name of this machine. Interestingly, this engine is not just an artificially weakened motor from more powerful models. McLaren used 30% of the new parts here.

Acceleration to 100 km / h achieved by the 570S is identical to the Porsche 991 Turbo with Sport + and is 3.2 seconds. The speedometer pointer with the accelerator pedal pressed to the floor will stop only after 328 km / h. Good performance is not only due to the low weight and powerful engine but also to the fast, 7-speed SSG transmission, from which the torque is transmitted to the rear wheels.

simos 18 tuning inside winols

Stage 3 Special Engine Swap Project Audi S3 With GTI Engine (SIMOS 18) & Upgraded To TTE525 Turbo Producing 385HP 500NM

Our team at ECUFILES.com developed for one of our Asian customers a strong stage 3 solution for a Audi S3 with swappend SIMOS 18 GTI engine. The GTI SIMOS 18 is a very powerful and good engine to be tuned, however this request was unusual and our customer demanded us to help him with this project. However when tuning these engines often torque monitoring causes problems and also boost issues especially on stage 3 projects. We at ECUFILES developed a perfect Stage 3 tuning which ensures smooth driving witouth worrying about limp issues or any other issue related to torque monitoring or boost.

Simply register to our portal and let us know what you need. You will receive ready to upload tuning files in less than 30 min. This will satisfy your customers to the max.

Registers to our portal today and get access to
Safe and Best-Performing Tuning Files

Safe Tuning Files

We are aware that behind the wheel there is a person who drives a machine. An expensive machine... That's why our tuning files are being developed with special and detailed care. Tuning an ECU file can be complicated and time-consuming. While we develop this stage 3 file for Audi S3 with swapped GTI SIMOS 18 engine, we make sure that our files are safe for the car and the driver.

The ECU (engine control unit) controls most of the important part of the vehicle, so mistakes are not allowed. Register and log in to our system to get professionally tuned ECU files for GTI SIMOS 18.